Flex TPO Inside Outside Corner User Manual download pdf

_____________________________________________________________________________________________________

Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533

Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com

Product Data Sheet

FLEX TPO INSIDE/OUTSIDE CORNERS

PRODUCT DESCRIPTION

Flex TPO Inside/Outside Comers are pre-molded and are used for flashing inside/outside corners on a

variety of details. Installation is fast and easy with no cutting or stretching required.

PHYSICAL PROPERTIES

INSTALLATION

1. Begin welding at the innermost corner point and work away from the corner.

2. Use a lower temperature setting on the heat welder than when welding reinforced TPO membrane.

(Typically a setting of “6” on a scale of “10” is appropriate for welding Flex TPO Inside/Outside

Corners).

3. Use the edge of the roller to crease the corner flashing into any membrane step-off to create a proper

seal.

CAUTIONS AND WARNINGS

Store Flex TPO Inside/Outside Corners in a cool, shaded area and cover with light-colored, breathable,

waterproof tarpaulins. Flex TPO Inside/Outside Corners or TPO membrane that has been exposed to the

weather for approximately 7 days or longer prior to use must be prepared with Flex Weathered Membrane

Cleaner prior to hot air welding.

Thickness: 60-mil

Color: White, Gray and Tan

_____________________________________________________________________________________________________ Flex Membrane International Corp. 2670 Leiscz’s

No comments

Flex TPO Inside Outside Corner User Manual