Flex Substrate Adhesive 7003 User Manual download pdf

_____________________________________________________________________________________________________

Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533

Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com

Page 1

Product Data Sheet

FLEX SUBSTRATE ADHESIVE 7003

PRODUCT DESCRIPTION

Flex Substrate Adhesive is a single component cold applied rubberized asphalt emulsion adhesive

designed specifically to adhere Flex Fleeceback Elvaloy® Thermoplastic Roof Membranes to a variety of

compatible substrates.

FEATURES AND BENEFITS

● VOC Compliant

● Cold applied and requires no special equipment such as kettles

● Non-flammable

SUGGESTED USES

Flex Substrate Adhesive is applied to an approved substrate in a uniform thickness with a brush, notched

squeegee or roller. Coverage is dependent on the porosity and smoothness of the surface to which it is

applied. Approved substrates include structural concrete, lightweight insulating concrete,

polyisocyanurate insulation, gypsum based roof cover boards, and approved base sheets.

PHYSCAL PROPERTIES

Type: Rubberized Asphalt Emulsion. Water Vehicle

Color: Black

Solids by Weight, %: Approximately > 70%

Viscosity (CPS): Approximately 18,000 cps

Consistency @ 77°F: Heavy Paint Consistency, Readily Pourable

Specific Gravity@ 77°F: 0.99

Pounds per Gallon: 8.4 lbs

Flash Point, °F (SETA): > 212 F°

VOC: 3 g/l

Size: 5 gal. container/50 lb.

COVERAGE

Coverage is dependent of the surface to be coated. Average coverage rate is 60 square feet per gallon.

Cementitious surfaces require application of an approved primer or sealer 24 hours prior to adhesive

application.

APPLICATION

Flex Substrate Adhesive should be applied at temperatures of 50°F and rising. The adhesive should not

be applied at temperatures below 40°F, and should be stored at 70°F for at least 48 hours prior to

installation at temperatures below 55°F. Do not apply adhesive if there is a possibility of freezing

temperatures within 24 hours of application. Adhesive should not be applied in temperatures over 100°F.

Materials to be bonded should be clean, dry, smooth and free from contaminants. Stir adhesive

thoroughly before use. Apply adhesive by brush, heavy roller or notched squeegee to the substrate at the

1 2

Product Data Sheet 1

Summary of Contents

Page 1 - Product Data Sheet

_____________________________________________________________________________________________________ Flex Membrane International Corp. 2670 Leiscz’s

Page 2

_____________________________________________________________________________________________________ Flex Membrane International Corp. 2670 Leiscz’s

Comments to this Manuals

No comments

Flex Substrate Adhesive 7003 User Manual

Browse online or download User Manual for For Home Flex Substrate Adhesive 7003. Flex Substrate Adhesive 7003 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For Home Flex Substrate Adhesive 7003